|
|
|
|
|
|
|
|
|
|
|
|
Jets-2 button operates 1 Speed Pump-2 |
Jets-2 button operates Pump-1 Low Speed |
|
|
Jets-2 button operates Air Blower |
Jets-2 button operates Pump-1 Low Speed |
|
|
Jets-2 button operates 2 speed Pump-2 |
Jets-2 button operates Pump-1 Low Speed |
|
|
A-Pressing theJets-2 button once will turn ON Pump-2 Low Speed |
|
|
|
Pressing again will turn OFF Pump-2 Low Speed & turn ON Pump-2 High Speed |
|
|
|
Pressing again will turn Pump-2 OFF |
|
|
|
Jets-2 button operates Air Blower & 1 Speed Pump-2 |
Jets-2 button operates Pump-1 Low Speed |
|
|
Pressing the Jets-2 button once will turn ON Air Blower |
|
|
|
Pressing again will turn OFF Air Blower & Turn ON Pump-2 |
|
|
|
Pressing again will turn ON Air Blower & Pump-2 |
|
|
|
Pressing again will turn all OFF |
|
|
|
1 Filtration cycle |
2 Filtration cycle |
|
|
Jets-1 button operates 2 Speed Pump-1 |
Jets-1 button operates Pump-1 High Speed |
|
|
Pressing the Jets-1 button once will turn ON Pump-1 Low Speed |
a- Pressing the Jets-1 button once will turn ON Pump-1 High Speed |
|
|
Pressing again will turn OFF Pump-1 Low Speed & turn ON Pump-1 High Speed |
b- Pressing again will turn OFF Pump-1 High Speed |
|
|
Pressing again will turn Pump-1 OFF |
|
|
|
Turning OFF the Thermostat Control |
Turning ON the Thermostat Control |
|
Thermostat control Heater only & Pump-1 Low Speed is controlled by the timer |
Thermostat control Pump-1 Low Speed & Heater |
|
|
|
This code must be OFF |
This code must be OFF |
|
|
Temperature in Celsius |
Temperature in Fahrenheit |
|
|
Turning ON the Blower Timer System |
Turning OFF the Blower Timer System |
|
|
Spa Light, 3 Function for Fiber Optic |
Spa Light, 2 Function for Standard Light |
|
|
Pressing the Light button once will turn ON Fiber Optic Light |
a- Pressing the Light button once will turn ON Spa Light |
|
|
Pressing again will turn ON Fiber Optic Light & Color Wheel |
b- Pressing again will turn Spa Light OFF |
|
|
Pressing again will turn Both OFF |
|
|
|
Heater shuts OFF when Pump-1 High Speed relay comes On |
Heater will operate with Pump-1 Low & High Speed, Pump-2 or Blower |
|
|
Heater shuts OFF when Pump-2 relay comes On |
Heater will operate with Pump-1 Low & High speed, Pump-2 or Blower |
|
|
Heater shuts OFF when Blower relay comes On |
Heater will operate with Pump-1 Low & High speed, Pump-2 or Blower |
|
|
Used for Circulating Pump that runs continuously |
Thermostat Control Pump-1 Low Speed & Heater |
|
|
This code must be OFF |
This code must be OFF |
